Talkeys OS by OscillatorSynk
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is manually set to 86.
Volume (VCA) volume
Amplification level is set to -6.56dB (77) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 11.
Oscillators ranges timbre
Oscillators 1 range is 16'.
Oscillators 2 range is 8'.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 105.34Hz (92).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 177.83Hz (54) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 182.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 216.
Note Num direct modulation amount for low-pass filter envelope amount is 115.
Filter has no resonance.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±16 cents (82).
Oscillators drift level is manually set to 20. Drift rate is 0
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Oscillator 2 pitch pitch
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is manually set to 34. Effect 4 level is manually set to 10.
Noise Gate fx
not yet complete
Ambient Reverb fx
not yet complete
Mod Wheel modulator
Controls OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | matrix | OSC 2 Pitch | 21 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 115 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 182 |
| menu | VCF Envelope Velocity Sensitivity | 216 |
Voice Num modulator
Controls OSC 2 Pitch Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| pitch | matrix | OSC 2 Pitch Modulation Depth | 58 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 1.13s (128) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 182 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.57s (158) |
| VCF Envelope Sustain Level | 49% (126) |
| VCF Envelope Release Time | 1.13s (128) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |